This storyboard does not have a description.
Remember: tie your hair up before going near the tools and to wear safety goggles!
Remember: you should always put a scrap piece of wood under your work to protect the table!
To Begin with you will need to place a drill bit into the drill so that you can use it. You do this by twisting the bit shown and the drill bit in. Turn the dial the other way until it clicks.
Secondly, get your piece of wood and place it onto some scrap wood.
To switch on the drill so that you can continue to step 4 you will need to locate a small button on your drill near the drill bit as shown by the arrow. This button is pushed one way to turn on and another way that we will come onto later.
Remember: keep your safety glasses on to avoid damage!
Repeat steps 3-5 until you are happy.
To get your drill out of the wood you will need to press the button that you pressed to get your drill going forward. Press this than press the start button and your drill should come out.
Next, there should be a button round about where the arrow is pointing, press this and push into the wood to start drilling.
Explore Our Articles and Examples
Try Our Other Websites!
Photos for Class
– Search for School-Safe, Creative Commons Photos! (It Even Cites for You!
– Easily Make and Share Great Looking Rubrics!