Step 1: Get your 4 pieces of Wood that you have measured and cut up into the measurements that will correctly fit. You should have cut 2 pieces of wood with a long length and 2 other piece with a long width and your base.
Step 2: Next you want to glue one of the smaller pieces with your two other longer pieces.
Step 3: Then connect your base to the bottom like this...
Step 4: Wait till the next day to install your draw slides. When the next day comes, put your draw slides onto each side of the longer length pieces of wood near the bottom of it. This can be installed through drawing a straight line as shown on each side,
Step 5: Next you want to get your hand drill and insert a screw into the holes provided in the draw slides. Your draw should now look something like this so it can slide into the table.
Step 6: Slide your wooden drawer into the table, lining up with the draw slides that are already in the table. Your wooden draw is now ready to be used!